Are you tired of feeling like your Bissell Cleanview vacuum is not performing as well as it used to? Do you notice a decrease in suction power or a buildup of dirt and debris on the floors? If so, it’s time to give your trusty vacuum a thorough cleaning! In this comprehensive guide, we’ll walk you through the step-by-step process of cleaning your Bissell Cleanview vacuum, helping you to restore its original performance and extend its lifespan.
Why Cleaning Your Bissell Cleanview Vacuum is Important
Before we dive into the cleaning process, it’s essential to understand why regular cleaning is crucial for your vacuum’s performance and longevity. Here are some key reasons why cleaning your Bissell Cleanview vacuum is a must:
- Improved Suction Power: A dirty vacuum filter, clogged brushes, and accumulated dirt and hair can significantly reduce suction power, making it difficult to clean your floors effectively.
- Extended Lifespan: Regular cleaning helps to prevent wear and tear on your vacuum’s internal components, reducing the risk of breakdowns and prolonging its lifespan.
- Better Air Quality: A clean vacuum filter ensures that your vacuum doesn’t release dust, dirt, and allergens back into the air, promoting better air quality and a healthier environment.
- Reduced Maintenance Costs: By cleaning your vacuum regularly, you can avoid costly repairs and replacements, saving you money in the long run.
Step-by-Step Guide to Cleaning Your Bissell Cleanview Vacuum
Now that we’ve emphasized the importance of cleaning your Bissell Cleanview vacuum, let’s get started with the step-by-step process!
Step 1: Gather Essential Cleaning Tools and Supplies
Before you begin, make sure you have the following tools and supplies:
- A screwdriver (preferably a flathead screwdriver)
- A soft-bristled brush or a toothbrush
- A cloth or paper towels
- Warm water
- Mild dish soap
- A clean, dry cloth for wiping down surfaces
Step 2: Disassemble the Vacuum (Partially)
To access the internal components, you’ll need to partially disassemble your Bissell Cleanview vacuum. Start by removing the dust cup and the pre-filter, which are usually held in place by clips or screws. Set these components aside for now.
Step 3: Clean the Pre-Filter and Dust Cup
Use a soft-bristled brush or toothbrush to gently remove any visible dirt and debris from the pre-filter and dust cup. You can also use a cloth or paper towels to wipe down these components.
Next, fill a sink or a large container with warm water, and add a small amount of mild dish soap. Soak the pre-filter and dust cup in the soapy water for about 10-15 minutes. This will help loosen any stubborn dirt and debris.
After soaking, use a clean cloth or paper towels to wipe down the pre-filter and dust cup, removing any remaining dirt and soap residue. Allow these components to air dry completely before reassembling.
Step 4: Clean the Vacuum Filter
The vacuum filter is a critical component that requires regular cleaning to ensure optimal performance. Remove the filter from the vacuum and tap it gently to dislodge any loose dirt and debris.
Use a soft-bristled brush or toothbrush to remove any visible dirt and debris from the filter. You can also use a vacuum cleaner (if you have one) to suction out any loose dirt and debris.
Next, wash the filter with warm soapy water, and let it air dry completely before reinstalling.
Step 5: Clean the Brush Roll
The brush roll is prone to accumulating hair, dirt, and debris, which can reduce suction power and affect the vacuum’s overall performance. Remove any visible hair and debris from the brush roll using a screwdriver or your fingers.
Use a cloth or paper towels to wipe down the brush roll, removing any remaining dirt and debris. You can also use a mild dish soap and warm water to clean the brush roll, but make sure to rinse it thoroughly and let it air dry before reinstalling.
Step 6: Clean the Vacuum’s Exterior and Wheels
Use a soft-bristled brush or toothbrush to remove any visible dirt and debris from the vacuum’s exterior, including the wheels and axles.
Use a cloth or paper towels to wipe down the vacuum’s exterior, removing any remaining dirt and debris. You can also use a mild dish soap and warm water to clean the exterior, but make sure to rinse it thoroughly and let it air dry before using.
Step 7: Reassemble the Vacuum
Once you’ve cleaned all the internal components, it’s time to reassemble your Bissell Cleanview vacuum. Make sure to secure all screws and clips properly to ensure the vacuum is functioning correctly.
Tips and Tricks for Maintaining Your Bissell Cleanview Vacuum
To keep your Bissell Cleanview vacuum running smoothly, here are some additional tips and tricks to keep in mind:
- Regularly Check and Clean the Filter: Make it a habit to check and clean the vacuum filter every 1-2 months, depending on usage.
- Empty the Dust Cup Frequently: Regularly emptying the dust cup will prevent dirt and debris from accumulating and affecting the vacuum’s performance.
- Store the Vacuum Properly: Store your Bissell Cleanview vacuum in a dry, clean area, away from direct sunlight and moisture.
- Avoid Using the Vacuum in Wet Conditions: Avoid using your vacuum in wet conditions, as this can damage the internal components and reduce the vacuum’s lifespan.
- Refer to the User Manual: If you’re unsure about any cleaning or maintenance procedures, refer to your Bissell Cleanview vacuum’s user manual for guidance.
Conclusion
Cleaning your Bissell Cleanview vacuum may seem like a daunting task, but with these simple steps, you can restore your vacuum’s performance and extend its lifespan. Remember to clean your vacuum regularly, follow the manufacturer’s guidelines, and maintain a clean and dry environment to ensure optimal performance.
By following this ultimate guide to cleaning and maintaining your Bissell Cleanview vacuum, you’ll be able to enjoy a cleaner, healthier home, and a longer-lasting vacuum that will continue to serve you well for years to come.
Why is my Bissell Cleanview not working properly?
Your Bissell Cleanview may not be working properly due to a variety of reasons. One common issue is blockages in the suction path, which can reduce the vacuum’s suction power. Check the vacuum’s hose, wand, and floor nozzle for any blockages or debris that may be restricting airflow. Additionally, dirty filters or a clogged pre-filter can also affect the vacuum’s performance.
Make sure to regularly clean and maintain your vacuum to prevent these issues. Check the user manual for specific instructions on how to clean and replace filters. If you’re still experiencing problems, consult the troubleshooting section of the manual or contact Bissell’s customer service for further assistance.
How often should I clean my Bissell Cleanview’s filter?
It’s recommended to clean the pre-filter every 1-3 months, depending on usage. If you have pets or allergies, you may need to clean it more frequently. The pre-filter can be washed with warm soapy water, and then dried completely before reinstalling. The HEPA filter, on the other hand, should be replaced every 6-12 months, depending on the manufacturer’s instructions.
Regularly cleaning and replacing the filters will ensure your vacuum runs efficiently and effectively. A dirty filter can reduce suction power and even damage the vacuum’s motor. By staying on top of filter maintenance, you’ll be able to keep your vacuum running like new.
What’s the best way to clean the brush roll on my Bissell Cleanview?
To clean the brush roll, start by removing any visible hair or debris with scissors or a screwdriver. Then, soak the brush roll in warm soapy water for about 30 minutes. Gently scrub the brush roll with a soft-bristled brush or cloth to remove any remaining dirt or debris. Rinse thoroughly and let it air dry before reinstalling.
Regularly cleaning the brush roll will help to prevent hair tangles and maintain the vacuum’s performance. You should clean the brush roll every 1-3 months, depending on usage. If you have pets, you may need to clean it more frequently.
How do I clean the vacuum’s wheels and axle?
To clean the wheels and axle, start by removing any visible hair or debris with scissors or a screwdriver. Then, mix baking soda and water to create a paste, and apply it to the wheels and axle. Let it sit for about 30 minutes before rinsing with warm water. Use a soft-bristled brush or cloth to gentle scrub away any remaining dirt or debris.
Clean wheels and axles will help to ensure your vacuum moves smoothly and easily. Regularly cleaning the wheels and axles will also help to prevent damage to the vacuum’s motor and other internal components.
Can I use my Bissell Cleanview on hardwood floors?
Yes, your Bissell Cleanview can be used on hardwood floors, but you’ll need to adjust the suction control setting to a lower level to prevent scratching. You may also want to consider using the vacuum’s hard floor tool, which is specifically designed for cleaning hardwood floors.
When using your Bissell Cleanview on hardwood floors, be sure to move slowly and deliberately to prevent scratching. Avoid using the vacuum’s beater brush on hardwood floors, as it can scratch or damage the finish.
How do I store my Bissell Cleanview when not in use?
When storing your Bissell Cleanview, make sure it’s turned off and unplugged from the power source. Wrap the cord around the vacuum’s cord wrap to prevent tangles. Store the vacuum in a dry, clean area away from direct sunlight and moisture.
Proper storage will help to prolong the life of your vacuum and ensure it remains in good working condition. Avoid storing the vacuum in areas with high humidity or temperatures, as this can cause damage to the internal components.
Can I wash the vacuum’s exterior with water?
No, you should not wash the vacuum’s exterior with water, as it can damage the electrical components or compromise the vacuum’s seal. Instead, use a soft, dry cloth to wipe down the exterior. For tough stains or dirt buildup, you can use a damp cloth, but make sure to wipe it dry immediately to prevent water spots.
Regularly wiping down the exterior will help to keep your vacuum looking like new and prevent dirt and dust from accumulating. Be sure to avoid using harsh chemicals or abrasive cleaners, as they can damage the vacuum’s finish.